Fisuanc® MT
Steel for Bricks
Ties for expansion joints
- They guarantee the continuity of transfer of certain forces through the joint.
- They are low cost items and avoid the pathological construction problems that could occur if not implemented.
- They are made only of stainless steel which protects them from corrosion.
- Their specific design guarantees that only horizontal movement of the wall takes place along its plane.
- They permit visual verification of correct fitting.
- To connect two different structural walls separated by a vertical movement joint.
- They are made from stainless steel that have one end covered by a plastic sleeve to prevent adhesion to the mortar. This has a clearance of approximately 1cm to allow free movement along the horizontal plane of the wall.
- The shim is 200 mm long and the sleeve measures 124 mm. They are 19 mm and 24 mm wide respectively, and the height and thickness are 2 mm and 5.5. mm.
- CE marking according to the specifications established in the standard EN 845-1.
Catalogues
Our technical department is at your disposal
Technical Department
If necessary, and with the aim of ensuring maximum safety and peace of mind in the use of our products, our technical department is at your disposal to advise you on the correct calculations and dimensions of the products.
