Fisufor® Plug

Fisufor plug® is a prefabricated reinforcement formed by two parallel longitudinal wires that form by means of a central wire. The central wire is made is the form of a truss and is soldered in the same plane of the structure along the inner side of the longitudinal wires. Therefore, there is no overlap of the longitudinal and transverse wires and the maximum reinforcement thickness is equal to the diameter of the longitudinal wires.

The ends of the fisufor plug® pieces have a special geometric configuration in the form of a plug that allows the overlap of 250mm without having to cut any wire.

The steel used in its manufacture is in accordance with standard EN 10020.

Fisufor plug® comes with the CE marking in accordance with the specifications of the standard 845-3.

ACCORDING TO THE TYPE OF WIRE
- Smooth.
- Corrugated (upon request).

ACCORDING TO TYPE OF PROTECTION AGAINST CORROSION
- Fisufor plug® Z, manufactured with steel wire with a heated zinc galvanized coating with a minimum of 70 gr/m2 in accordance with standard EN 10244.

- Fisufor plug®
I, manufactured with stainless Steel according to the standard EN 10088.

- Fisufor plug®
E, manufactured with steel wire in galvanized zinc coating with a minimum hot dip galvanized of 70 gr/m2 according to the standards of EN 1022 and subsequent epoxy coating of at least 80 μm according to the standard of EN 10245.

DIMENSIONS

PRESENTATION
- 3050 mm pieces.
- Packets of 25 units.
- Pallets of 40 packages (1000 units of 3050 mm).
- Each package contains an ID label with the description of product,its barcode and batch number.

Coming soon.